Deep Clean Your Fuel System At Blackstone Automotive

February 2nd, 2010 by blackauto

Having trouble with your fuel system? Bring your domestic vehicle into Blackstone Automotive for a check up.
700 Rathbun Street
Blackstone, Massachusetts 01504
508-883-6811

Today we’re talking about fuel system cleaning. The first thing to know is how important it is to have a clean fuel system. You need fuel to go, and the cleaner your fuel system, the more efficiently the fuel will burn. That means more power and better fuel economy.

A clean fuel system saves money at the pump. We guess you could say, it all starts and ends at the pump. One of the most important things you can do to keep your fuel system clean is to buy good quality gas. Major brands have detergents that keep gum and varnish from rapidly building up in the fuel system.

So buying cheaper gas can actually cost you in the long run. Now, most cars on the road are more than five or six years old. That means they’ve had time for some dirt and rust to start accumulating in the fuel tank. This junk needs to be filtered out of the fuel before it hits your engine. That’s the fuel filter’s job.

When the fuel filter is clogged, the dirty fuel will bypass the filter and go on up to the engine where it can clog fuel injectors and get into the cylinders. That could do some damage. So you should have your fuel filter changed when recommended. Check your owner’s manual or ask your service advisor if your fuel filter is due for replacement.

The fuel then goes up into the throttle body. This is another area where varnish and gum can accumulate. A professional fuel system cleaning will use a combination of special cleaning chemicals and old fashioned swabbing to clean out the throttle body. Now, the fuel injectors are the last stop in the fuel delivery system.

It’s real important to keep those fuel injectors clean. The fuel injectors need to deliver a precise amount of fuel, at exactly the right time, in a particular spray pattern. They just can’t do that if they’re dirty. Dirty fuel injectors really rob power and waste fuel.

It is important for the fuel system proper, but there are a couple other things that will help keep your engine clean as well. Of course, air is mixed with the fuel before it’s burned. Dirty air means dirt gets into your engine, so you need to replace your engine air filter when it’s dirty.

The PCV value routes unburned fuel that escapes into the lower engine back up into the intake system to be burned. A sticky PCV valve needs to be replaced to make sure that system is working properly and the breather filter needs to be replaced if it’s dirty as well.

Do all these things and your engine’s air and fuel will be as clean as possible. You’ll get much better fuel economy and better power

.

Posted in Fuel System | No Comments »

Tire Maintenance In Milford

January 27th, 2010 by blackauto

With the recent focus in Milford on improving fuel economy, we’ve been told how important it is to maintain our tire pressure.

Everyone in Milford knows that tires wear out, but we all want to make them last as long as possible because they’re fairly expensive to replace. In addition to saving gas, properly inflated tires last longer. Under-inflated tires will wear out more quickly.

Some people in Milford wonder if there is benefit to adding a few extra pounds of pressure when they fill up their tires. But actually, there isn’t. In fact, there are very good reasons not to over-inflate your tires. For one, the middle of the tread will wear unevenly because the full tread is not contacting the road properly. That also adversely affects your handling.

Come in and see us about tire maintenance for your Blackstone, Massachusetts vehicle.
Blackstone Automotive
700 Rathbun Street
Blackstone, Massachusetts 01504
508-883-6811

Every vehicle in the Milford area has a sticker on the driver’s side door jamb that tells you the manufacturer’s recommended tire pressure. This recommendation is an integral part of the vehicle’s suspension tuning. A lot of engineering actually goes into the recommended tire pressure, so it’s important to follow it.

What else do we need to know about tire maintenance? Tire rotation and balancing are very important. Let’s start with rotation. Because the front tires handle the brunt of turning forces, the shoulders of the front tires wear more quickly than the rear tires. We rotate the tires so that they all get to do some duty on the front and they’ll all wear evenly over their life.

For most vehicles, front tires are rotated to the rear and vice versa. Others recommend a cross rotational pattern. Some vehicles use an asymmetrical tire so those tires need to stay on either the right or left side – it’ll say which on the tire. Some high performance cars have asymmetrical tires and different sizes on the front and rear. These can’t be rotated at all. Your owner’s manual will have details for your car.

How often should you rotate your tires? Your owner’s manual will have a recommendation. Your service advisor at Blackstone Automotive can do a visual inspection to let you know if it looks like it should be done. The interval is typically around 5,000 miles.

You know, some people don’t think new tires need to be balanced. What they aren’t taking into account is the wheel. Between the wheel and the tire – even a new tire – there’s enough variation to require balancing.

When you add the valve stem and tire pressure monitoring sensors required on new cars, balancing is definitely in order. When a tire’s out of balance, it’s actually hopping down the road. You’ll feel the vibration through the steering wheel if a front tire’s out of balance and through your seat if it’s a rear tire.

Proper wheel balance promotes tire life and increases safety. Historically, lead weights have been attached to the wheel to bring it into balance. Lead gives some environmental concern, so steel weights are starting to be substituted.

Also, always use the same size tire on an axle. Different size tires on the front or on the back can lead to some real handling problems. And tire manufacturers recommend that when you get two new tires, they be installed on the rear because that’s where you need the most traction to avoid spinning-out.

Posted in Tires and Wheels | No Comments »

Fuel Filter Service in Blackstone Massachusetts

January 22nd, 2010 by blackauto

There are a surprising number of small, inexpensive parts that can lead to expensive engine damage when they fail. It doesn’t seem right.

Fortunately a lot of those things can be taken care of in routine maintenance. They may not be easy to remember, because it is a long list, but your service center at Blackstone Automotive can help you know what’s scheduled to be taken care of.

Some of us in Blackstone Massachusetts really don’t look forward to going in for an oil change and then getting a list of the other things the manufacturer recommends.

But automotive maintenance is all about prevention, and addressing small problems before they get big. Let’s take the fuel filter for example.

You may not know this but the median age for private vehicles on our Blackstone Massachusetts roads is over nine years. When cars get older, five years or so, they’ve accumulated a lot of dirt and rust in their gas tanks. If that dirt gets into the engine it can cause thousands of dollars worth of damage. So somewhere between that dirty gas tank and the price of a great vacation – is the lowly fuel filter: a very inexpensive part that doesn’t cost too much to replace. And your car’ll just run better too.

A clogged fuel filter can’t let enough fuel through. You might notice at first that your car is running fine around town, but struggles or sputters on the Blackstone Massachusetts freeway or when you accelerate. Enough fuel can’t get through to meet the demands of higher speed. If it gets bad enough your engine might just shut off or not start at all, which could be dangerous.

Some fuel filters have a bypass. When they get clogged, they allow dirty fuel to move around the filter element so dirt ends up in the engine. We’ve already talked about how expensive that can be.

The fuel filter is even very important for newer cars. The fuel is still dirty even if there isn’t rust in the tank. It’s just that the fuel filter will need to be changed more frequently as the vehicle gets older.

How often should you change your fuel filter? Check your owner’s manual. Your Blackstone Massachusetts service advisor at Blackstone Automotive can tell you as well. It’s usually around thirty thousand miles or so. Ask if it’s time for a full fuel system cleaning as well. They often go hand in hand.

It’s good to know that your Blackstone Massachusetts service center has your back. When you’re motivated to maintain your vehicle’s performance and to reduce operating costs, you’ll think of Blackstone Automotive as your ally – and maybe even your memory.

Posted in Fuel System | No Comments »

Blackstone Drivers Severe Service Maintenance Schedules

January 1st, 2010 by blackauto

Your vehicle manufacturer publishes two auto maintenance schedules. The regular schedule and the severe service schedule. It’d be wrong for us to tell you that everyone in Woonsocket always needs to follow the severe service schedule – but its wishful thinking to say that the regular schedule is always good enough for your domestic vehicle.

Contact Blackstone Automotive to learn more about Severe Service Requirements for your domestic vehicle
You can find us at:
700 Rathbun Street
Blackstone, Massachusetts 01504
Or call us at 508-883-6811

At Blackstone Automotive we’ll give you the definitions and explain the issues, and you can be the judge. Most manufactures list the following as severe conditions:

  • Most of your trips are less than four miles.
  • Most of your trips are less than 10 miles and outside temperatures are below freezing.
  • The engine is at low speed most of the time – not on the highway.
  • You operate your vehicle in dusty areas.
  • You regularly tow a trailer or carry heavy loads.
  • Driving in very hot or very cold weather.

So think about your typical week. Do you live a block from a Massachusetts freeway on-ramp and enjoy a non-stop commute to work in Bellingham or Milford? Or are you like the rest of us where 90% of our trips are on the severe service list?

The answer may be different at different times of the year and for the different drivers in your family. Think of the two service schedules as bookends. Let’s suppose your owner’s manual says the severe service oil change recommendation is 3,000 miles and the standard recommendation is 5,000 miles. You know that you need to change the oil somewhere between 3,000 and 5,000 miles. Look at your driving patterns and Blackstone road conditions and honestly evaluate which end of the spectrum you’re closer to.

If you have a job in a neighboring town such as Millville or Bellingham and most of your commute is freeway miles, you may choose the regular service schedule for your car. On the other hand, if you live within a few miles of work and only get on the highway a handful of times every month, something closer to the severe service schedule is more appropriate.

Now why is this so important? Moisture builds up in the engine oil from normal condensation. Short trips around Woonsocket or driving when it’s really cold means that the engine doesn’t heat up enough for the moisture to evaporate. The water in the oil leads to oil sludge that gums up your engine and doesn’t let the oil protect it as well. That’s why you need to change your oil more frequently – to get the sludge out before it causes problems.

Towing, heavy loads and very hot Massachusetts summer weather means that your engine and transmission will operate at higher temperatures and with more stress. The fluids will break down more quickly. Additives that clean and prevent corrosion will be depleted sooner. Dusty conditions, which may extend also to areas with high air pollution, mean that fluids will get dirty faster and that filters will plug up and won’t work right.

All of these things can lead to premature wear and repairs down the road. They’ll also hurt your fuel economy. If you want some personalized advice, talk with your family oriented Blackstone Automotive service advisor. We can help you restore your vehicle to good working order and help you know the best schedule to follow. If you’re not sure, err on the side of protection.

Watch our informative AutoNetTV auto video tips at the top of this post.

Posted in Monitoring System | No Comments »

Timing Belt Replacement in Blackstone

December 23rd, 2009 by blackauto

Today we want to talk about timing belts. They’re something that many Blackstone drivers don’t know much about and yet your vehicle won’t run if it’s broken – and it could cause many thousands of dollars damage if it does break. A broken timing belt is usually a tale of woe. Even though timing belt replacement is scheduled in the owner’s manual, it’s not the kind of thing that most Woonsocket car owners remember because it’s not well understood.

Let’s review what a timing belt does. As you know, the engine’s power is generated in the cylinders. A piston rides up and down in the cylinder. During the first down stroke, an intake valve at the top of the cylinder opens and air and fuel is drawn into the cylinder. Then the piston returns to the top, compressing the fuel and air mix. At the top, the spark plug fires, igniting the fuel pushing the piston down in the power stroke. As the piston once again returns up in the final stroke of the cycle, an exhaust valve opens at the top of the cylinder and the exhaust is pushed out. The timing belt is what coordinates the opening and closing of the intake and exhaust valves. It’s called a timing belt because the valves have to open and close at just the right time.

Now, not all Millville and Bellingham vehicles have timing belts. Some have timing chains. Like the name implies, they use a chain rather than a belt to perform the function. It used to be that most engines used timing chains, which are extremely durable. Manufacturers started using belts rather than chains to save money in the manufacturing process. So now we’re left with a component that can break. They sort of shifted the problem to us. There are two broad categories of engine design: interference and non-interference. If the timing belt on a non-interference engine breaks, the engine simply stops running. That could be very dangerous depending on where you are at the time, but it causes no internal engine damage.

Interference engines, on the other hand, will get real messed up when the timing belt breaks, because the valves will actually fall down into the path of the pistons. Things get chewed up when that happens and it’ll cost thousands to repair the engine.

So, what are the warning signs? Unfortunately, there really aren’t any. There aren’t tell-tale sounds. In some vehicles, a technician from Blackstone Automotive may be able to see part of the belt for a visual inspection, but many have a cover that’s in the way. The reality is that if the belt slips even one notch, it might as well be broken for all the damage it’ll cause. There’s no middle ground.

So how can we avoid these problems? Simply replace the timing belt when your owner’s manual calls for it. It can be 60,000 miles; it might be 90,000 or 100,000 miles. The point is, if you have 60,000 or more miles, ask your Blackstone Automotive service advisor right away if your manufacturer requires a timing belt replacement.

Contact Blackstone Automotive to learn more about your car’s Timing Belt
You can find us at:
700 Rathbun Street
Blackstone, Massachusetts 01504
Or call us at 508-883-6811

Sometimes you can go quite a while without a failure, but we’ve seen them happen within a couple of oil changes of being due. It’s not worth the risk.

What does it cost to replace a timing belt in Bellingham or Milford? Well, that really depends on what kind of car you have. I can tell you that it’s usually not very easy to get to the timing belt – you often have to remove some accessories to get at it. It isn’t a cheap procedure, but it’s a fraction of what it could cost to repair the damage caused by a failure.

At Blackstone Automotive we’re all about trying to prevent costly repairs, keeping you and your passengers safe and increasing your driving enjoyment. Thanks to AutoNetTV for their great auto video tips.

Posted in Parts | No Comments »

What To Do In Case Of An Accident in Woonsocket

December 18th, 2009 by blackauto

Screeching tires, crunching metal – it’s an accident! If you’ve ever been in a car accident in Woonsocket, even a minor one, you know how upsetting it can be. It’s hard to think straight and know what to do.

Let’s review what you should do in case of an accident:

When an accident occurs, you should always stop. Leaving the scene of an accident in Blackstone is considered a crime – even if it’s not your fault. And hit and run penalties are fairly severe, possibly resulting in steep fines, loss of your Massachusetts driver’s license or even jail time.

Your jurisdiction may require that you try to help someone who is injured by calling for help or performing first aid if you are able. Warn other Bellingham and Milford motorists by putting out flares, using your flashers or lifting your hood. Call Woonsocket emergency services as soon as possible. Tell the operator if medical or fire help is needed.

Always file a Blackstone police report. It’s tempting to skip this if everything seems to be ok. But without a police report, the other guy can say whatever he wants about the accident later, and you’ll not have an objective report to help defend yourself. Discuss the accident only with the police. Emotions are strong after an accident and we naturally want to talk about it – don’t. Never admit fault or guilt to anyone including the police officer. Sometimes we may feel at fault, but in the eyes of the law, the other guy is responsible.

Truthfully give the officer the facts: such as “I was going thirty miles an hour” not “I wasn’t speeding”. Remember, anything you say to the officer or anyone else can be used against you.

Also get the officer’s name and ID number and ask where you can get a copy of the accident report.

Get the facts on the driver and owner of the other vehicle:

  • Name
  • Address
  • Phone number
  • Date of birth
  • Driver’s license number and expiration
  • Insurance information

Also take down a description of the other Blackstone vehicle, license plate and vehicle identification number. Most Massachusetts auto insurance companies don’t record license plate numbers, so the VIN number is the best way to track the vehicle.

Ask witnesses, including passengers, to wait for the police. If they can’t wait, ask for contact information and request that they write a brief description of what they saw. If someone refuses to leave their name, write down their license plate number so the police can track them down later if necessary. Always call your insurance agent or your insurance company. Call or see a physician if you think you may have been injured. For vehicle repairs, call Blackstone Automotive at 508-883-6811

Contact Blackstone Automotive to learn more about what do do in case of an auto accident.
You can find us at:
700 Rathbun Street
Blackstone, Massachusetts 01504
Or call us at 508-883-6811

Blackstone Automotive and AutoNetTV hope that you never have to use this information and wish you happy Blackstone travels.

Posted in Automotive News | No Comments »

What Blackstone Automotive Service Consumers Should Know

December 11th, 2009 by blackauto

There are some things Woonsocket consumers should know about Blackstone automotive service and repair. First and foremost, Blackstone Automotive cares about you and your family’s safety. And we really appreciate your business. Blackstone Automotive in Blackstone wants to build a trusting relationship that becomes the foundation for a mutually beneficial experience for years to come.

Building on that foundation, there are some things that would help you understand the auto service and repair business better. First, it can be really hard to fix cars. The days of shade tree mechanics are long gone. The majority of automotive systems are computerized. It takes a lot of training and very expensive equipment to diagnose and repair modern vehicles. The technicians that work for Blackstone Automotive need extensive computer training – not just how to run the diagnostic systems, but also searching for the right parts, networking with other technicians to help them with a difficult problem and pulling together a job order that makes sure that each step of the process is addressed.

The threshold for getting started as a technician gets higher all the time and there is a huge commitment to on-going training every year. This training takes time and money. It contributes to business overhead. The average Millville or Bellingham driver may not realize the business and environmental regulations Blackstone Automotive must comply with. Of course that costs money too. Like any business, overhead is a big factor.

When you go into a Woonsocket restaurant you don’t value the meal by what the food would cost at the grocery store. The restaurant has rent, wages, insurance, taxes, utilities, professional fees, equipment, supplies – you get the picture. The restaurant has to charge enough to not only pay for the ingredients, but for all these other things as well while making enough profit to remain in business. If you value the meal and are satisfied with your dining experience, you’ll come back and tell your friends.

It’s the same for Blackstone Automotive. The value of its service is not the cost of the parts they replace, but in your satisfaction with the results. If they deliver a good product at a fair price, Blackstone customers are happy to see them succeed as a Massachusetts automotive business.

Contact Blackstone Automotive to learn more about our extensive auto service training.
You can find us at:
700 Rathbun Street
Blackstone, Massachusetts 01504
Or call us at 508-883-6811

Your Blackstone service center loves to see its customers whenever they come in, but they would much rather see them three or four times a year for routine maintenance than once a year on a tow truck. They want to work together with you to avoid breakdowns. Tell your Woonsocket area friends and family to go in for their scheduled maintenance too. That lowers the service center’s marketing costs and helps keep its labor rates down. That’s good for everyone.

Blackstone Automotive appreciates this great review of automotive service from AutoNetTV.

Posted in Service Standards | No Comments »

Nitrogen Fill For Tires in Blackstone Massachusetts

December 4th, 2009 by blackauto

So, everyone in the Blackstone Massachusetts area knows how great helium is – you know, party balloons, squeaky voices. But a lot of people around Blackstone still haven’t heard about the benefits of nitrogen in your tires, and how it can help your tires. Here’s some great advice from AutoNetTV, brought to you by Blackstone Automotive.

Nitrogen has actually been around for a long time in the Blackstone Massachusetts commercial sector, but it’s just starting to catch on for private vehicles in the 01504 zip code area.

Why nitrogen in your tires? Air is air, right? Actually, it turns out there is a difference.

Contact Blackstone Automotive to learn more about nitrogen in your tires
You can find us at:
700 Rathbun Street
Blackstone, Massachusetts 01504
Or call us at 508-883-6811

The heart of the matter is maintaining proper tire inflation. When your tires are properly inflated, they last longer, handle better and more safely, and save you money at the gas pump.

The problem is that tires filled in Blackstone with regular air can lose a pound and a half of air pressure every month. This just happens as the oxygen in the tire seeps out. So if you don’t check your pressure for a month or two, well, you can be significantly low – low enough to actually affect your handling, shorten tire life and waste money at the fuel pump.

How does nitrogen help? Regular air contains about 78% nitrogen. Nitrogen is the largest molecule in air. It’s dry and non-flammable. Air also contains 21% oxygen, which is smaller and seeps out of the tire three to four times faster than nitrogen.

So, a tire filled with nitrogen at Blackstone Automotive will take about six months to lose as much pressure as regular air does in just one month. So it’s more forgiving for those who don’t check their pressure every week.

Also, when oxygen is at higher temperatures – like those inside your tire when you’ve been driving for awhile – it oxidizes the inside of your tire. Getting the oxygen out of your tire means that it’ll last longer.

Who’s using nitrogen? Well, let’s start with NASCAR and Indy. These racers like nitrogen’s ability to maintain consistent tire pressure and reduce tire temperatures under very demanding conditions. The US government requires all commercial aircraft to have nitrogen in their tires. NASA and the US Military use nitrogen. The mining industry has been filling those “humongous” tires with nitrogen for years. And semi trucks and trailers are starting to use nitrogen extensively.

You may have heard some detractors of nitrogen. But the studies and white papers from tire and vehicle manufacturers demonstrate that the technology really works.

In fact, a prominent consumer research group did a study where they filled some tires with air and some with nitrogen and stacked them outside for a year. They observed that the nitrogen filled tires did hold their pressure better, but they couldn’t see the economic benefit. But that particular test has very little to do with the real world. Most tires are actually holding up cars and they also get driven around and do a lot of work. So if nitrogen helps them last longer, saves gas and gives safer handling, it’s worth considering.

Learn more about nitrogen in your tires by watching our attached auto tips video from AutoNetTV.

Posted in Tires and Wheels | No Comments »

E-85 Fuel Safety Advice From Blackstone Automotive

November 25th, 2009 by blackauto

Today at Blackstone Automotive we want to talk with you about a very important safety issue. This automotive safety warning is coming from a very unusual source: fire fighting experts. You’ve probably heard of E-85 gasoline being offered in the Woonsocket area. Some newer vehicle models are specifically built to run on E-85 – the rest are not.

Does your vehicle use E-85 gasoline? Bring it down to Blackstone Automotive at 700 Rathbun Street in Blackstone, Massachusetts 01504 to find out, or give us a call to make an appointment by calling 508-883-6811.

E-85 gasoline has been developed to fight air pollution and reduce oil consumption. E-85 fuel is a mix of 15% ethanol, a grain-base alcohol, and 85% gasoline. So-called Flex-Fuel vehicles are designed to use either normal gasoline or E-85 gas. The result is lower harmful exhaust emissions to our local Woonsocket community.

All gas engines can run with up to 10% ethanol and in fact a lot of gasoline sold in the Blackstone Massachusetts area does contain some ethanol. The problem comes when well meaning people without Flex Fuel certified vehicles put E-85 into the tank.

At a 15% concentration, the potential for problems arises. Because of the chemical differences between ethanol and gasoline, special seals and gaskets are needed for Flex Fuel vehicles in Blackstone Massachusetts. In a normal engine, the ethanol in E-85 gas will eat away important seals and gaskets. This leads to gas and oil leaks.

You can imagine the fire hazard caused by leaking gasoline. Fire fighting experts caution consumers to only use E-85 if they know they vehicle is certified to handle it. They expect vehicle fires to increase because of using the wrong fuel in non-Flex Fuel vehicles.

So are people who don’t have a Flex Fuel vehicle but use E-85 to help the environment actually putting themselves at risk? Yes. In fact, service and repair centers in Blackstone Massachusetts are being warned to purchase fire extinguishers that use the special foam needed to extinguish ethanol fires as a precaution in case starting-up an ethanol damaged engine leads to a fire.

Obviously, this isn’t something you want to have in your Blackstone Massachusetts garage at home, either. If you have a Flex-Fuel certified vehicle, feel free to protect the environment by using E-85 gasoline. If not – please do not use E-85 in an engine that’s designed to run on unleaded gasoline only. At Blackstone Automotive we are concerned about your safety. If you have questions or want to find out how to determine if your vehicle can safely use E-85, go to www.e85fuel.com for more resources.

Take a look at our attached auto safety tips video from Auto Tips Videos.

Posted in Warranty | No Comments »

Drive Train – What You Need to Know In Blackstone

November 18th, 2009 by

One Blackstone automotive service issue that doesn’t get much attention is driveline service. Drivelines don’t get talked about very much around Blackstone, but they’re very important. First let’s define what the driveline is:

Taking a small step back, the power plant is comprised of the engine and transmission. The driveline starts there and includes all of the components that transfer power from the transmission to the wheels.

That’s not really a lot of components, but they handle the full force of the engine. Without the driveline you’re not moving. So we need to take good care of it. The driveline components differ depending on whether your vehicle has front wheel drive, rear wheel drive, all wheel drive or four wheel drive. For purposes of our discussion, we’re going to have to over simplify a bit.

If you are ready to have your drive train looked at, give us a call:
Blackstone Automotive
700 Rathbun Street
Blackstone, Massachusetts 01504
Call Us at 508-883-6811

Let’s start with front wheel drive. The point where the transmission stops and the driveline begins is a little blurred with front wheel drive because the transaxle houses both the transmission function and the differential function. The half shafts that send power to each front wheel, come out of the transaxle. The shaft is connected to the wheel by a constant velocity, or CV, joint. The CV joint is protected from dirt and water by an airtight, flexible rubber boot.

So, driveline service would include properly servicing the transaxle and inspecting the CV boot to see if it’s torn or loose. If it is, it needs to be replaced and the CV joint inspected for damage. Repairs may be in order. Besides visual damage to the airtight CV boot, you might hear a clicking noise when turning. Recommended maintenance for the transaxle and CV joints will be spelled out in your owner’s manual or check with your Blackstone service advisor.

On to rear wheel drive. The driveline for a rear wheel drive vehicle starts with the driveshaft – that long tube that connects the transmission with the differential on the rear axle. Some vehicles in Blackstone have a two piece drive shaft. The shafts are connected to the transmission and the differential with big universal joints. You’ve probably heard the term ‘u-joints‘. These joints can wear out, just like the CV joints in front wheel drive vehicles. You may hear some clunking or feel a jolt when shifting into drive or reverse – if you do, get your driveline inspected.

The differential on the rear axle sends power out to each rear wheel through half shafts in the axle. The differential fluid needs to be drained periodically and replaced with clean fluid. When the seal on the end of the axel is damaged or leaks, the axel will need to be serviced. The routine maintenance item here is differential service. Be sure to check your owner’s manual or Blackstone service advisor for intervals.

Now let’s go on to all wheel drive. Remember that the difference between all wheel drive and four wheel drive is that an all wheel drive vehicle is essentially providing power to all of the wheels all of the time. The vehicle may be able to shift more of the power to the front or to the back depending on where you need traction. All wheel drive vehicles are designed to work well on dry pavement. Even some high-end sports cars from makers like Lamborghini and Porsche have all wheel drive.

Some all wheel drive vehicles are designed to work well off-road, but all hard-core rock crawlers are four wheel drive. These guys thrive in mud, sand, rocks and hills – but they don’t work well on dry pavement when they’re in four wheel drive. So they have the option to shift to rear wheel drive only on dry pavement.

Most all-wheel drive vehicles are very similar to front wheel drive when it comes to the front end. They also have a center differential that transfers power to the rear differential. Connecting it all is a shaft from the transaxle to the center differential and another from the center differential to the rear differential. So all of the normal front wheel drive service is required as well as service to the center and rear differentials.

Four wheel drive can be thought of as a rear wheel drive vehicle that can also send power to the front axle. There’s a transfer case in the middle of the vehicle that can be shifted to send power through a drive shaft to a differential on the front axle. So you need differential service for the front and rear differentials and for the transfer case as well.

The bottom line is that the maintenance schedules are in your owner’s manual. Your Blackstone service advisor can answer any questions you’ve got. If this is the first time you’ve heard some of this stuff – it’s time to ask someone at Blackstone Automotive if any of it needs to be done now.

Watch our auto tips video from AutoNetTV.

Posted in Drive Train | No Comments »

« Older Entries